Welcome to the official website of Guangzhou Ruihe New Materials Technology Co., Ltd.!

Cable Accessory Material Solutions

Category:

Organosilicon Material Solutions for Power and Wire & Cable Applications

Liquid silicone rubber and solid silicone rubber exhibit excellent hydrophobicity, outstanding resistance to both high and low temperatures, superior weatherability, and remarkable resistance to electrical tracking. They can be used continuously over a temperature range of –40°C to 200°C.

Email:1541901416@qq.com

Phone:020-36896519

Product Details

Product Introduction

Features: ·Liquid silicone rubber and solid silicone rubber exhibit excellent hydrophobicity, outstanding resistance to both high and low temperatures, superior weatherability, and remarkable resistance to electrical tracking; they can be used continuously over a temperature range of –40°C to 200°C.
Applications: ·Suitable for insulation and conductivity applications in power products such as cold-shrink cable accessories and plug‑in connectors.

Typical Performance Data	Test Method	Unit	RH7270-40X	RH7360-40X	RH7280-45X	RH7380-45X
Appearance	Visual estimation	/	Translucent/Gray	Gray	Black	Black
Viscosity	DIN53019	mPa·s	150,000		400,000
Hardness	GB/T531.1	Shore A	40±2	40±2	45±2	45±2
Density	GB/T533	g/cm3	1.12±0.01	1.2±0.01	1.35±0.01	1.35±0.01
Tensile strength	GB/T528	MPa	≥8.0	≥8.0	≥6.0	≥6.0
Elongation at break	GB/T528	%	≥650	≥650	≥450	≥450
Tear strength	GB/T529	kN/m	≥35	≥35	≥25	≥25
Permanent deformation upon rupture	GB/T528	%	≤3.2	≤3.2	≤3.2	≤3.2
Linear shrinkage rate	GB-T14235.4	%	≤2.5	≤2.5	≤2.5	≤2.5
Dielectric breakdown voltage	GB/T1408.1	kV/mm	≥22	≥22	--	--
Volume resistivity	GB 1410	Ω∙cm	1×10 ¹⁵	1×10 ¹⁵	≤80	≤80
Dielectric constant (50 Hz)	GB 1409	/	2.8-3.2	2.8-3.2	--	--
Dielectric loss (50 Hz)	GB 1409	/	0.005-0.007	0.005-0.007	--	--
Tracking resistance performance	GB/T 6553	/	1A4.5	1A4.5	--	--
Application areas			Liquid-insulated plug-in connector	Solid-insulated plug-in connector	Liquid-conductive plug-in connector	Solid-conductivity plug-in connector

Test Items	Test Method	Unit	RH7270-40Y	RH7270-40Z	RH7360-40Y	RH7360-40Z	RH7280-40Y	RH7380-40Y
Appearance	Visual estimation	/	Translucent/Gray	Translucent/Gray	Translucent/Gray	Gray	Black/Black	Black
Viscosity	DIN53019	mPa·s	600,000	400,000	——	——	600,000	——
Hardness	GB/T531.1	Shore A	40±2	40±3	40±2	40±2	40±2	40±2
Density	GB/T533	g/cm3	1.12±0.01	1.12±0.01	1.12±0.01	1.12±0.01	1.35±0.01	1.35±0.01
Tensile strength	GB/T528	MPa	≥9	≥8.5	≥9.0	≥8.5	≥7.0	≥7.0
Elongation at break	GB/T528	%	≥700	≥650	≥700	≥650	≥500	≥500
Tear strength	GB/T529	kN/m	≥40	≥35	≥40	≥35	≥30	≥30
300% elongation at break, permanent deformation (120°C, 72 h)	GB/T528	%	≤6	≤10	≤10	≤12	≤15	≤15
Linear shrinkage rate	GB-T14235.4	%	≤2.5	≤2.5	≤2.5	≤2.5	≤2.5	≤2.5
Dielectric breakdown voltage	GB/T1408.1	kV/mm	≥22	≥22	≥20	≥20	--	--
Volume resistivity	GB 1410	Ω∙cm	1×10 ¹⁵	1×10 ¹⁵	1×10 ¹⁴	1×10 ¹⁵	≤80	≤80
Dielectric constant (50 Hz)	GB 1409	/	2.8-3.2	2.8-3.2	2.8-3.2	2.8-3.2	--	--
Dielectric loss (50 Hz)	GB 1409	/	0.005-0.007	0.005-0.007	0.005-0.007	0.005-0.007	--	--
Tracking resistance performance	GB/T 6553	/	1A4.5	1A3.5	1A4.5	1A3.5	--	--
Application areas			Liquid Cold-Shrink Accessories	Low-cost liquid cold shrink	Solid Cold-Shrink Accessories	Solid low-cost cold shrink	Liquid-conductive cold-shrink accessories	Solid-conductive cold-shrink accessories

Note:

·Curing conditions: After thoroughly mixing the liquid adhesive components A and B in a 1:1 ratio, mold the material in a 140 mm × 120 mm × 2 mm mold at 175°C for 5 minutes.

·Solid adhesive: vulcanized under a 25×25 mm mold, using a 150 mm × 140 mm die, with vulcanization at 175°C for 5 minutes.

·This data is for reference only; the actual material properties and molding process parameters shall be subject to those provided by our Technical Department.

Keywords:

Material solutions for insulators, surge arresters, encapsulated pole-mounted switchgear, instrument transformers, and reactors.

None

Related products

Optically transparent silicone gel

This adhesive is an optically transparent silicone, consisting of two components, A and B. Before use, Component A must be thoroughly mixed with Component B, followed by injection molding.

Standard platinum-cured extrudable silicone rubber series

This series of extrusion-grade elastomers complies with halogen‑free, RoHS, REACH, and U.S. FDA standards, exhibits excellent processability, and is well suited for platinum‑catalyzed calendering and extrusion processes.

Self-lubricating silicone rubber

After vulcanization and molding, the self-lubricating thermosetting silicone rubber exhibits a slight oil‑leaching effect, which enhances and maintains the surface friction characteristics of the finished part. This product is well suited for compression molding.

High-temperature-resistant silicone rubber

It exhibits excellent high-temperature resistance (250°C–350°C), aging resistance, superior thermal dissipation, and compressive strength.

Molded flame-retardant silicone rubber

This series of flame-retardant adhesives meets the UL94 V‑0 flammability standard, offering excellent flame retardancy and superior processability, making it well suited for molding and extrusion processes.

Leave us a message

We consistently uphold a business philosophy of win-win cooperation, and look forward to advancing hand in hand with you, achieving mutual benefits and shared success, and creating brilliance together!

Submit Message

*Note: Please ensure that all information provided is accurate and keep your contact details up to date. We will get in touch with you as soon as possible.

Contact phone number:

020-36896519

Company email:

1541901416@qq.com

Huadu Company Address:

1st Floor, Building A2, Zone A, Meiwang Science and Technology Park, Guangzhou Airport Economic Zone (No. 6, Guangtang South Street, Xinya Subdistrict, Huadu District)

Zhaoqing Factory Address:

No. 33-3, Xin’an Avenue, Zhaoqing New District, Dinghu District, Zhaoqing City

Technical Support: Zhongqi Cross-border, Guangzhou

中企跨境-全域组件 2.0.3 制作前进入CSS配置样式

导航下拉添加类名.active

在线客服添加返回顶部

右侧在线客服样式 1,2,3 1

图片alt标题设置： Guangzhou Ruihe New Materials Technology Co., Ltd.

表单验证提示文本： Content cannot be empty!

循环体没有内容时： Sorry,no matching items were found.

CSS / JS 文件放置地

Leave us a message.