5.webp
+
  • 5.webp

Compounded silicone rubber RH-NE670

Category:

Organosilicon Material Solutions for Power and Wire & Cable Applications

Precipitation‑type compounded silicone rubber RH‑NE670 is suitable for peroxide curing at low temperatures in extrusion and thermal‑curing ovens, and is widely used for insulation layers in cables that comply with national standards. It meets the testing requirements of halogen‑free, FDA, RoHS, and REACH regulations.

Email:1541901416@qq.com

Phone:020-36896519

Contact Us

Product Introduction
Precipitation‑type compounded silicone rubber RH‑NE670 is suitable for peroxide curing at low temperatures in extrusion and thermal‑curing ovens, and is widely used for insulation layers in cables that comply with national standards. It meets the testing requirements of halogen‑free, FDA, RoHS, and REACH regulations.

Test Items

Unit

Test Standard

Test Requirements

Typical value

Appearance of the rubber compound

Visual estimation

 

Translucent

Plasticity

cmm

GB/T 12828-2006

260-290

280

Vulcanization rate at 120℃: T10/T90

S

GB/T16584-1996

T10>15,30

15.45

Dumbbell plate molding conditions: 140°C × 5 min; aging strip: 158°C × 60 days.

NRRG4mm2

Test Items

Unit

Test Standard

Before aging

After aging

Before aging

After aging

Hardness

ShoreA

GB/T 531.1-2008

70   

 75

68

 73

Density

g/cm3

GB/T 533-2008

1.21   

 1.22

1.21

 1.22

Tensile strength

MPa

GB/T528-2009

7.2   

 5.5

8

 8

Elongation

%

GB/T528-2008

260

 150

300

 200

Tear strength

kN/M

GB/T529-2008

24

 14

 

 --

Electrical Properties of Dumbbell Plates

Test Items

Unit

Test Standard

Test Requirements

Typical value

Low-impact resistant

°C

GB/T 2423.1-2008

≥40

≥40

Breakdown voltage

KV/mm

ASTM D149

≥18

20.5

Volume resistivity

10*15Qcm

IEC 60093

≥1

2.1

Limited-edition full-range products

Halogen-free

ROHS REACH

 

Special Note: Typical values are for reference only and shall not be used as the basis for actual determination.
Storage conditions: The rubber compound and color masterbatch should be stored at room temperature (≤25°C) in a sealed container, protected from direct sunlight; shelf life is 6 months. Vulcanizing agents A and B must be stored separately, sealed, and refrigerated at 4°C; their shelf life is 3 months.

Keywords:

Previous:

High-cost-performance extruded adhesive RH-NE720

Next:

Supporting Materials Solutions for the Power Industry

Related products

Optically transparent silicone gel

Optically transparent silicone gel

This adhesive is an optically transparent silicone, consisting of two components, A and B. Before use, Component A must be thoroughly mixed with Component B, followed by injection molding.
Standard platinum-cured extrudable silicone rubber series

Standard platinum-cured extrudable silicone rubber series

This series of extrusion-grade elastomers complies with halogen‑free, RoHS, REACH, and U.S. FDA standards, exhibits excellent processability, and is well suited for platinum‑catalyzed calendering and extrusion processes.
Self-lubricating silicone rubber

Self-lubricating silicone rubber

After vulcanization and molding, the self-lubricating thermosetting silicone rubber exhibits a slight oil‑leaching effect, which enhances and maintains the surface friction characteristics of the finished part. This product is well suited for compression molding.
High-temperature-resistant silicone rubber

High-temperature-resistant silicone rubber

It exhibits excellent high-temperature resistance (250°C–350°C), aging resistance, superior thermal dissipation, and compressive strength.
Molded flame-retardant silicone rubber

Molded flame-retardant silicone rubber

This series of flame-retardant adhesives meets the UL94 V‑0 flammability standard, offering excellent flame retardancy and superior processability, making it well suited for molding and extrusion processes.

Leave us a message

We consistently uphold a business philosophy of win-win cooperation, and look forward to advancing hand in hand with you, achieving mutual benefits and shared success, and creating brilliance together!

Submit Message

*Note: Please ensure that all information provided is accurate and keep your contact details up to date. We will get in touch with you as soon as possible.

Contact phone number:

020-36896519

Company email:

1541901416@qq.com

Huadu Company Address:

1st Floor, Building A2, Zone A, Meiwang Science and Technology Park, Guangzhou Airport Economic Zone (No. 6, Guangtang South Street, Xinya Subdistrict, Huadu District)

Zhaoqing Factory Address:

No. 33-3, Xin’an Avenue, Zhaoqing New District, Dinghu District, Zhaoqing City

Leave us a message

If you are interested in our products, please leave your contact information, and we will get in touch with you as soon as possible. Thank you!

Submit Now
%{tishi_zhanwei}%

Technical Support: Zhongqi Cross-border, Guangzhou

Leave us a message.

We consistently uphold a business philosophy of win-win cooperation, and look forward to advancing hand in hand with you, achieving mutual benefits and shared success, and creating brilliance together!

Submit Message

*Note: Please ensure that all information provided is accurate and keep your contact details up to date. We will get in touch with you as soon as possible.